Tech Tips

• 00.00 Jensen 541 Technical Tips Cover, Side Label and Contents
• 1.0 Jensen 541 Buying Guides, Reviews and History
• 2.0 Engine 3.0 Transmission and Gear Box 4.0 Fuel and Carburettor
• 5.0 Electrics 6.0 Wiring Diagrams 7.0 Ignition 8.0 Cooling 9.0 Heating 11.0 Brakes 12.0 Steering Suspension Differential and Rear Axle
• 13.0 Wheels and Tyres 14.0 Body and Trim 15.0 Bodywork and Rust 16.0 Parts 17.0 Misc
• 18.0 Restorations
• 19.0 Owner's Stories

Tech Tips from the defunct US based Jensen Interceptor Owners' Club 

Kindly provided by Frank Schwartz

Tech Tips taken from the club's magazines, compiled by Phil Fish.

9.0 Exhaust
9.1 Fitting an exhaust to a Mk III Interceptor joc_mag_085
9.2 Removing exhaust manifold in-place Torque 6 Autumn 2010

10.0 Heating and A/C
10.1 Air Con joc_mag_066
10.2 Heating and AirCon joc_mag_067
10.3 Electronic Heater Control Torque 8 2014
10.4 Heating and Air-Conditioning Torque 5

11.0 Brakes
11.1 Interceptor Mk II brake rebuild joc_mag_033
11.2 Brakes joc_mag_069
11.3 Fitting Copper Brake Pipes 100_1991_October
11.4 Disc brake judder JOC 166 Nov-Dec 2002
11.5 Spongy Brakes JOC 173 Jan-Feb 2004
11.6 Brake Fluid Reservoirs JOC 208
11.7 Better Brakes JOC 229 May-June 2013
11.8 Front and Rear Brake Pads. joc_mag_154
11.9 Interceptor pulls to the left 5 Torque 2 Summer 2006
11.10 Mk 1 Brake caliper conversion Torque 4 Summer 2008
11.11 Which brake master cylinder is this Torque 5 Autumn 2009
11.12 Intermittent hard brake peddle Torque 5 Autumn 2009
11.13 Bleeding the brake master cylinder Torque 6 Autumn 2010
11.14 Ultimate brake overhaul Torque 6 Autumn 2010